The Raptor System III is easily the highest output, widest bandwidth plug-and-play, music and home theater subwoofer system ever offered in a single package system. Raptor System III utilizes the only 2 x 15" dual opposed driver subwoofer modules that feature an up-firing/down-firing configuration ever offered commercially. The advantages of a subwoofer that's configured this way are explained in detail on our website Q&A page.

The Raptor System III consists of four Raptor Modules, each module loaded with two BHT-15 long throw proprietary subwoofer drivers, the SEQSS analog signal shaper and the all-new A-14K amplifier. With 9 selectable curves, it's truly like having 9 subwoofers systems in one, eliminating the costly experimentation involved in trying many different systems until you find the one you prefer. Again, because it's worthy of repetition, that's 8-proprietary BHT-15 long throw drivers, capable of a staggering 40 liters of displacement driven by 14000 peak watts with 9 user-selectable native frequency responses.

Your Home Theater space will be immediately enhanced by the addition of the Raptor's impeccable craftsmanship and unique high-tech design. Specifically designed to fit snugly into a corner for optimal performance in a tiny footprint of less than 3 square feet per module or per stack. The System is also designed to be stacked for even more space-saving and power concentration. And, with the SEQSS taking up only i rack space and the A-14K amplifier taking up only 2RU of your hardware rack and weighing in at a mere 36 pounds, Raptor is as easy to integrate as it is to look at. 

Features:

Unrivaled low end reproduction and value

  • A world-beating $169.98 per liter of displacement
  • Vibration-free operation, courtesy of the dual opposed driver vibration cancellation
  • Extremely durable, low maintenance powder coat, stainless steel and bamboo finishes
  • Satin nickel 5-way binding posts on every Raptor Module
  • Wide bandwidth, high output from <10 Hz to crossover in most rooms, signal chain permitting
  • Stainless steel legs are leveling and suitable for any surface

    Technical specifications

    Dual BHT-15 drivers per module x 2 = 4 drivers total

    • 4.9 liters of displacement from each driver, 39.2 liters total
    • 2.5 inches of peak-to-peak excursion
    • Three aluminum shorting rings per driver
    • 3 inch (75 mm) aluminum voice coil former
    • Dual 4 ohms 4 layer copper voice coil

    SEQSS Custom Analog Signal Shaper

    • Nine user-selectable signal shaped frequency response curves
    • Frequency Response: Flat to DC (no signal roll off on the low end)
    • RCA input
    • Dual XLR outputs
    • 100-120V/60 Hz mains power

    A-14K Class TD Amplifier

    • 14,00W peak into 4 ohms, bridged mode, as the Raptor System III is configured
    • THD @ 1k Hz @ 1dB <clipping = 0.05%
    • Signal to Noise Ratio (SNR) 112dBA
    • Frequency response: 5.5-20k Hz, +0dB, -3dB, -6dB @ 3 Hz, -10dB @ 1.5 Hz
    • Selectable gain: 23, 26, 29, 32, 35, 38, 41, 44 in dB
    • Input impedance: 20k ohms, balanced, 10k ohms unbalanced
    • Extensive protection circuitry

      User controls

      • Front panel gain attenuation
      • Rear panel mode and gain range dip switches
      • Rear panel Voltage Peak Limiter selection (preset at the factory for optimal use of your system)

      Connectors and cables

      • 10 Ga (recommended) speaker wire (not included)
      • XLR cable from upstream signal chain to A-14K input (not included)

      Connections

      • Binding posts and Speakon outputs on the A-14K
      • Satin nickel 5-way binding posts on the Raptor Modules
      • XLR inputs
      • XLR out/through

        Electrical requirements

        • Input voltage: 100-120 VAC 50-60Hz (recommended 30A dedicated line)
        • Maximum power when operating: 14,000W peak
        • 90W at idle

          Size and weight

          • Width: 22.5 inches (571.5 mm) diameter
          • Height: 32.25 inches (819 mm)
          • Weight: 105 pounds (47.75 kg)

          Write a review

          Note: HTML is not translated!
              Bad           Good

          Bossobass Raptor System Three

          • $6,799.00


          Available Options


          Related Products

          Bossobass Raptor System One

          Bossobass Raptor System One

          The Raptor System I is the only 2 x 15" dual opposed driver subwoofer that features an up-firing/..

          $2,599.00

          Bossobass Raptor System Two

          Bossobass Raptor System Two

          The Raptor System II utilizes the only 2 x 15" dual opposed driver subwoofer modules that feature an..

          $4,599.00

          Tags: Bossobass Raptor subwoofers